Quick Answer: What Is The Difference Between Deck Stain And Sealer?

Can you put Thompsons Water Seal over stain?

And actually, the answer is YES—you can use our EMTECH water-based sealer or top coat over the oil stain.

The beauty of all our water-based sealers and topcoats is that they’ll level and adhere to whatever solvent- or oil-based stain you’ve used..

Is it better to stain or oil decking?

Whether you should oil or stain will come down to what you want from your deck. A stain will improve the appearance of the deck, but oil will better help preserve its condition. However, you can bring back the natural look of the wood by using a pressure washer or choosing a decking oil with UV inhibitors. …

Does stain protect wood from weather?

While staining creates a rich, deep color that highlights natural wood grain, it does not provide long-term protection. … A Spar Varnish should be used on outdoor wood to protect it from weather damage and UV rays. 2.

How often should a deck be stained and sealed?

For most decks, sealing once each year is a good rule of thumb. Depending on the condition of your deck this can be adjusted, but keep in mind that you should never go beyond three years maximum before re-sealing and staining.

Can you put a clear coat over deck stain?

Applying a clear sealer over a deck stain is never a good idea. … Applying a clear sealer or polyurethane over a deck stain will cause more problems than it is worth. If you want a clear finish then you can strip off any old stain and start fresh with bare wood.

What deck stain lasts the longest?

Solid. Just like regular paint, solid stains hide the grain of wood, and the best should last three to five years on a deck, the longest of the three types of stains.

What is the difference between a stain and a sealer?

A sealer goes on clear or transparent to show the grain and the natural wood color. It prevents water from being absorbed and causing rot. Whereas a stain will do much the same as a sealer but also has a pigment added that blocks UV rays that can dry out the wood, causing it to crack or check, and gray.

What goes on first stain or sealer?

Once you’ve chosen a sealant strength, apply it to the end grain before you stain. Sand off any sealer that gets on the face of the board before you stain.

What happens if you stain over stain?

1. Staining over stain is easy and works beautifully if your applying a dark stain over a lighter stain on raw wood. 2. You can mix 2 or more stains together to make DIY custom stains.

Top 5 Wood Stain Colors For Wooden DecksFawn st-212.Chestnut Brown st-201.Desert Tan st-208.Butternut sol-213.Chestnut Brown sol-201.

What is a good deck sealer?

Our Top PicksBEST OVERALL: SEAL-ONCE MARINE Penetrating Wood Sealer. … EASIEST APPLICATION: Eco Advance Exterior Wood Water Repellent. … BEST VALUE: Olympic Stain Smartguard Concentrated Sealant. … LONGEST-LASTING SEAL: Olympic Stain Maximum Waterproofing Sealant.

How long after staining can you seal?

Every finish and stain is different, and drying times can vary widely from brand to brand or product to product. As a rule of thumb, you should wait 24-48 hours to allow the stain to fully dry before applying your polyurethane. If you’re extra cautious, you may even choose to wait 72 hours before applying your poly.

Is it better to stain or water seal a deck?

A: It’s really up to you. Just staining the deck will give you the color you want, although in high-traffic areas the stain could wear away quickly. … The advantage of this, they say, is the sealer provides additional protection against water and weather damage, while the stain helps reduce fading from UV rays.

What is the best stain and sealer for a deck?

Our Top PicksBEST OVERALL: Cabot Australian Timber Oil. … BEST FOR OLD DECKS: SaverSystems #1 Deck Premium Stain. … BEST FOR NEW DECKS: Ready Seal Natural Exterior Stain and Sealer. … HONORABLE MENTION: Cabot Semi-Solid Deck Stain.

Should you put a sealer over stain?

Applying a topcoat sealer is not required, but a finish protects the stained wood from scratches and keeps it from fading over time. If applying a polyurethane finish with a brush, apply one to two coats.

Do I need to seal deck after staining?

Most of the time, stains also contain a protective sealant. It’s a good idea, though, to re-seal your deck (or check that it needs to be re-sealed) once a year. Water-based stains can adhere to water or oil-based coatings already present on the wooden surface.

Does staining a deck protect it?

Like the name suggests, a wood stain contains pigments that physically change the wood’s color. This gives the wood protection against harmful UV rays. Stains also have the same beneficial water-repelling qualities. … Whether you choose a stain or a sealer, you can trust the deck masters to do the job right.

Should you pressure wash deck before staining?

Power washing a deck is a quick and efficient way to get it ready for painting or staining, but it isn’t a necessary prerequisite. In fact, in some situations, it isn’t even a good idea, because power washing can chip and gouge wood.